Adjusting Auger Drive Chain

1. Remove cap screws (A) and cover (B).


A-Cap Screws
B-Cover

H89365

OUO6043,0001C8F -19-07JAN08-1/2

2. Loosen nuts (A). Push on adjusting plate (B) to adjust chain tension.

3. Tighten nuts (A) to specification.

Specification

Nuts (A) -Torque 90 N·m (66 lb-ft)

NOTE: An overtightened chain will cause undue chain wear. Adjust chain tension so that the slack side movement is 10 mm (3/8 in.) up and 10 mm (3/8 in.) down.

H89018


A-Nuts
B-Plate

OUO6043,0001C8F -19-07JAN08-2/2