Attaching to a Rotary Harvesting Unit with AHC (Option)

KM1000922-UN-30JUL09

A - Activation button 1

B - Switch for tilting rotary harvesting unit to the right/left

Before attaching support wheel to a rotary harvesting unit with AHC option, move rotary harvesting unit to horizontal position.

There are two different procedures to do this:

1. Automatic lift of rotary harvesting unit to the highest position:

   Lift rotary harvesting unit to the highest position by pressing activation button (A). Thus rotary harvesting unit will be moved to horizontal position automatically.

2. Manual rotary harvesting unit tilt adjustment:

   Press and hold the right-hand side of switch (B) to lift the left-hand side of the rotary harvesting unit.

   Press and hold the left-hand side of switch (B) to lift the right-hand side of the rotary harvesting unit.

NOTE: When tilting the rotary harvesting unit the tilt information is displayed on the performance monitor.