300F Support Wheel
CAUTION: Before carrying out adjustment or service work, ALWAYS
shut off engine, remove ignition key and wait until all moving parts
have come to a stop.
| Symptom | Problem | Solution |
|
Support wheel is not locked. | Locking device is not engaged in locking pawl |
Repeat attaching procedure. |
|
Locking mechanism adjusted incorrectly |
Adjust locking mechanism. |
|
Return to pressure can not be adjusted. | Light plug of rotary harvesting unit not connected to forage harvester |
Connect light plug. |
|
Clearance between sensors and magnets adjusted incorrectly |
Adjust clearance. |
|
|
Sensors defective |
Replace sensors. |
|
|
Light plug configured incorrectly |
See your John Deere dealer. |
|
|
Forage harvester software configured incorrectly |
See your John Deere dealer. |
|
|
Support wheel is not locked completely. |
Lock support wheel completely. |
|
KM00321,00001E8-19-20090811 |