Operating Touch Pad Switches

Calculations for AREA and AREA/H are based on implement width and ground speed. Use a radar sensor for the most accurate values.

AREA (1)

Press AREA to display accumulated area in acres or hectares. The implement arrow must be in the down position to accumulate area.

Hold ZERO to clear accumulated area.

DISTANCE (4)

Press DISTANCE to display distance accumulated in meters or feet.

Distance is accumulated with the implement indicator in the down position.

Measurement is cleared when the ignition is turned off.

AREA/H (5)

Press AREA/H to display the current measurement for area coverage per hour.

Implement indicator must be in the down position.

WIDTH (7)

Press WIDTH to display measurement for implement width.

Press SET to change implement width.

Input implement width and press SAVE.

PTO RPM (9)

Press PTO RPM to display rear PTO speed.

Press switch again to display optional front PTO speed.

Front or rear PTO symbols will appear on display field.

ZERO (0)

Pressing “0” for four seconds will reset a numeric value to zero (0).