Lubricating the Front Axle and U.j. Shaft

LX1033514
LX1033514-UN-19NOV03

LX1030813
LX1030813-UN-30JAN03

LX1033515
LX1033515-UN-19NOV03

LX1030814
LX1030814-UN-30JAN03

Carry out this service after every ten hours of operation when working under very wet and muddy conditions.

Lubricate the grease fittings on the front axle and u.j. shaft (only partially shown) using John Deere multi-purpose grease.

Thoroughly clean all grease fittings prior to greasing. Replace damaged grease fittings immediately.

OU12401,0000FF5-19-20031201