Checking Neutral Start Circuit


Tractors with PowrQuad transmission:

LX1030820
LX1030820-UN-30JAN03

LX1030821
LX1030821-UN-30JAN03

  1. Depress the clutch pedal.

  2. Move range shift lever (A) to neutral.

  3. Move reverse drive lever (B) to "forward" position.

  4. Turn key in main switch as far as it will go to the right. The starting motor must NOT turn over. If it does, see your John Deere dealer immediately.

  5. Repeat the test in the "reverse" position.


Tractors with PowrQuad Plus transmission:

LX1033543
LX1033543-UN-24NOV03

LX1030823
LX1030823-UN-30JAN03

  1. Move range shift lever (A) to neutral.

  2. Move the reverse drive lever to "forward" or "reverse".

  3. Start the engine and wait 6-7 seconds. The "N" display must light up.

  4. Depress the clutch and engage any range. Gradually release the clutch pedal. The tractor must NOT start to move. If it does, see your John Deere dealer immediately.

OU12401,0001017-19-20031201