Changing Engine Oil Filter

LX1030826-UN-30JAN03

LX1029276-UN-08JUL02

Remove filter element (A) and clean mounting surface (B). If necessary, replace the dust seal on the contact surface with a new one. Make sure that the lugs on the dust seal engage in the recesses in the contact surface of the filter element.

Apply a thin film of oil to sealing rings (C) of new filter. Install new filter and tighten by hand.

Run engine for a few minutes. Shut off engine and remove key. Check that the base of the filter is tight.

Check the engine oil level.

Carry out first oil filter change after first 100 hours of operation.