Using Instrument Panel

LVAL38747-UN-01NOV12

B - Tachometer - Shows engine speed. Engine speed is shown in 100’s. Example: If indicator is pointing at 20 (20 x 100 = 2000 RPM).

Item	Measurement	Specification
Engine Idle
Low Idle	Speed	1575 ± 25 rpm
Rated	Speed	3200 rpm
Fast Idle	Speed	3370 ± 50 rpm

C - Engine Coolant Temperature Gauge - This gauge indicates the temperature of the cooling system. If the gauge needle reaches the red range, the engine is overheating and PTO will automatically disengage.

If the engine is overheated, remove load on machine immediately. Reduce engine to idle speed and allow engine to cool. Stop engine. Check coolant level in overflow bottle and check for air flow blockage to the radiator. If coolant level is correct and needle stays in the red range after cleaning grille, stop engine.

D - Right Turn Signal/Warning Flasher Indicator Light - This indicator light will turn on and flash when the turn signal switch is moved to the right turn position or when the light switch is turned to the warning flasher lights ON position or the headlights, taillights, and warning flasher lights ON position.

E - PTO Indicator Light - This light will turn on when the PTO switch is engaged.

F - Rear PTO Indicator Light - This light will turn on when the Rear PTO is engaged.

G - Parking Brake Light - This light will turn on when the ignition key is in the ON position and the parking brake is locked.

H - Mid PTO Indicator Light - This light will turn on when the Mid PTO is engaged.

I - Alternator/Battery Charging Light - This light will turn on when the ignition key is in the ON position and the engine is not running. If this light turns on while the engine is running, the alternator is not charging the battery. Move the throttle lever to the full throttle position. Stop the engine if light remains on.

J - Hour Meter - Shows total number of accumulated running hours. Use the hour meter as a guide when servicing various components of this machine.

K - Engine Coolant Temperature Light - This light will turn on when the engine coolant is above its high temperature limit. If this light turns on during operation, remove load on machine immediately. Reduce engine to idle speed and allow engine to cool. Stop engine. Check coolant level in overflow bottle and check for air flow blockage to the radiator. If coolant level is correct and light stays is on after cleaning grille, stop engine.

L - Not Used.

M - Engine Oil Pressure Light - This light will turn on when the ignition key is in the ON position and the engine is not running. If this light turns on while the engine is running, engine oil pressure is too low. Stop engine.

N - Engine Glow Plug Indicator Light - This light will turn on when the ignition key is in the ON position and the engine glow plug is initially heated for five seconds. The glow plugs will also be energized whenever the starter is engaged.