Replacing Relays and Fuses

IMPORTANT: Avoid damage! The electrical system may be damaged if incorrect replacement fuses are used. Replace the bad fuse with a fuse of the same amp rating.

  1. Park machine safely. (See Parking Safely in Safety Section.)

  2. Raise hood and remove right side panel.

  3. Identify relay or fuse.

    LVAL38357
    LVAL38357-UN-21AUG12


  4. Location

    Circuit

    Fuse Size
         

    A

    Relay - Glow Plug

    N/A

    B

    Relay - Starter

    N/A

    C

    Relay - Fuel Solenoid

    N/A

    D

    Fuse - Taillights

    10 amp

    E

    Fuse - Headlights

    10 amp

    F

    Fuse - Fender Lights (1025R only) and Worklights (Option)

    20 amp

    G

    Fuse - Ignition Run Power

    10 amp

    H

    Fuse - Ignition Switch

    20 amp

    I

    Fuse - Light Switch

    30 amp

    J

    Fuse - Power Outlet (1025R Only)

    15 amp

    Pull defective relay or fuse from socket.

  5. Push new relay or fuse or into socket.

  6. Install right side panel and lower hood.

KN52281,1003F3B-19-20120823