Testing Mid-PTO/Seat Switch Interface

1. Sit on the operator’s seat.

2. Lock the park brake.

3. Push the PTO switch knob to the disengaged/off position.

4. Move the transmission range shift lever to the N (neutral) position.

5. Start the engine.

6. Move the PTO selector lever to the mid-PTO only position.

7. Pull the PTO switch knob to the engaged/on position.

8. Raise up slightly from the operator’s seat. Do not dismount the machine.

   • The engine must stop.
   
   

9. Push the PTO switch knob to the disengaged/off position.

10. Start the engine.

11. Move the PTO selector lever to the mid and rear PTO position.

12. Pull the PTO switch knob to the engaged/on position.

13. Raise up slightly from the operator’s seat. Do not dismount the machine.

    • The engine must stop.
    
    

14. Push the PTO switch knob to the disengaged/off position.

15. Turn the key switch to the OFF position.