Using Reverse Implement Option (RIO)

CAUTION: Rotating blades are dangerous. Children or bystanders may be injured by runover and rotating blades.

Before backing up, carefully check the area around the machine.

NOTE: Backing up while mower is engaged is strongly discouraged. The Reverse Implement Option should be used only when operating another attachment or when operator deems it necessary to reposition machine with mower engaged.

1. Stop machine forward travel with attachment engaged.

2. Look behind machine to be sure there are no bystanders.

3. NOTE: If attachment stops while repositioning machine, return PTO/RIO switch to off position. Begin again with Step 2 in procedure.

   Lift PTO/RIO switch (A) up past the PTO engagement position to activate the reverse implement option. Then depress reverse travel pedal.

4. As machine begins to move backward, release PTO/RIO switch and reposition machine.

5. Resume forward travel. The attachment should continue operating.

6. Repeat Steps 1 through 5 to reposition machine again.