Parked Exhaust Filter Cleaning

IMPORTANT: If operator disregards indicators and continues to operate machine without allowing an automatic cleaning, engine performance is reduced. A parked exhaust filter cleaning procedure must be performed.

H94831-UN-13OCT09

Service Alert Indicator

H94828-UN-13OCT09

Exhaust Filter Cleaning Indicator

LV14837-UN-03OCT11

Exhaust Filter Cleaning Switch - Parked mode

The following occurs when exhaust filter becomes restricted:

• Service Alert and Exhaust Filter Cleaning Indicator (on dash) are illuminated.
• Engine power is reduced

At this time, a parked exhaust filter cleaning is required.

Before a parked exhaust filter cleaning can be completed, the following criteria must be met:

• Set engine rpm at slow idle.
• Engine must be warmed up to operating temperature (coolant temperature needle stable).
• Transmission must be in neutral.
• Zero ground speed commanded.
• Park brake must be engaged.
• PTO must be turned off.

1. IMPORTANT: Select a suitable space to park the machine and lower any implements all the way down to the ground.

   No other machine functions can be used while exhaust filter cleaning is taking place with the machine parked. Excluded from this are functions that are required for an emergency shutdown of the machine.

   Do not start exhaust filter cleaning if the fuel gauge has been showing a low fuel level for a long time.

   Only stop engine if absolutely necessary due to heat build up in the engine compartment.

   
   LV23494-UN-31OCT14

   Exhaust Filter Cleaning Switch - Parked mode

   
   LV17415-UN-10APR13

   Parked Cleaning In Process

   A - Parked Cleaning Position

   B - Exhaust Filter Indicator

   C - Information Display

   D - Filter Cleaning Disable Switch

   Position and hold the exhaust filter cleaning switch in the parked cleaning position (A) for 5 seconds, lamp should blink. Release, then push for another 3 seconds the icon should be a solid light.

   NOTE: If cancellation of a parked exhaust filter cleaning process is necessary, your best option is to push filter cleaning disable switch (D).

---




2. During the parked cleaning process, high exhaust temperature indicator (B) and park cleaning symbol on the switch illuminates.

3. The engine speed elevates up to 2200 rpm.

4. When the parked cleaning process is complete, park cleaning symbol on switch turns off. High exhaust system temperature indicator (B) remains on for 30 seconds after completion and the engine speed returns to low idle.

5. NOTE: If not returning machine to operation, allow engine time to return to normal operating temperature before stopping engine.

   After high exhaust temperature indicator (B) turns off, the system defaults to automatic (AUTO) exhaust filter cleaning mode and machine can be operated as normal.

IMPORTANT: If operator disregards indicators and continues to operate machine without allowing a parked cleaning, engine performance is reduced. A service exhaust cleaning procedure, by a John Deere dealer, is required.