Change Wheel Spacing and Tread Width

In special cases, front tires can be set to wide position; however, wide position cannot be used with a loader. Using wide position during loader operation reduces front axle life.

Rear tires can be mounted in one position only.

CAUTION: Avoid injury! Remove wheels safely.

• Use a safe lifting device and support machine securely on jack stands.
• Block front and rear of wheel not raised to prevent machine movement
• Wheel can be heavy or difficult to handle when removing.

Mounting Guidelines

• To keep tire rotation in right direction, move each rim to opposite side of machine, rather than turning rim around.
• Dished wheels can be reversed.
• Tighten all bolts to specifications.

Rear Tire Tread Dimensions

Rear Tire Size	Tread Width
15.00-19.5 R4 GA	1.08 m (42.8 in.)
41x14.00-20 R3 GA	1.10 m (43.5 in.)
11.2-24 R1 GA	1.15 m (45.2 in.)

Front Tire Tread Width Dimensions

Front Tire Size	Position	Tread Width
25x8.5-14 4PR R4 GA	(Narrow)	1.08 m (42.8 in.)
27x8.50—15 4PR R3 GA	(Narrow)	1.06 m (41.7 in.)
7.00-14 4PR R1 GA	(Narrow)	1.06 m (41.7 in.)
25x8.50-15 4PR R4 GA	(Wide)	1.25 m (49.4 in.)
27x8.50-15 4PR R3 GA	(Wide)	1.28 m (50.5 in.)
7.00-14 4PR R1 GA	(Wide)	1.28 m (50.3 in.)