Electrical System

If	Check
Battery Will Not Charge	Check to ensure 2 pin connector on alternator is plugged in properly. Loose or corroded connections. Check for a blown fuse. Loose or defective alternator belt. Dead cell in battery. Defective battery - check electrolyte level (if applicable). Defective alternator.
Battery Discharge Indicator Stays On With Engine Running	Low engine speed. Check to ensure 2 pin connector on alternator is plugged in properly. Check for a blown fuse. Loose or defective alternator belt. Defective battery. Defective alternator.
Starter Will Not Work	Loose or corroded battery connections. Blown fuse. Low battery output - check electrolyte level (if applicable). Neutral start switch faulty or not adjusted properly - See your John Deere Dealer. Key switch or starter faulty - See your John Deere Dealer. Range transmission lever not in neutral position. PTO engaged. Check for active fault codes.
Starter Turns Slowly	Low battery output - check electrolyte level (if applicable). Low battery power - charge battery. Engine oil viscosity too heavy. Loose or corroded battery connections.
Light Circuit Not Working	Fuse blown.
Cruise Control does not engage or shuts off	Adjust service brake switch