Remove and Install Wheels

1. CAUTION: Avoid injury! Remove wheels safely.

   • Use a safe lifting device and support the machine securely on jack stands.
   • Block the front and rear of wheel not raised to prevent machine movement.
   • The wheel can be heavy or difficult to handle when removing.
   
   

   Loosen the lug bolts slightly before raising the machine.

2. Raise the machine and lower onto suitable jackstand.

3. Remove the lug bolts and the wheel.

4. Install the wheels onto axle, insert the lug bolts, and lightly tighten the bolts.

5. Raise the machine, remove the jackstand and lower the machine to floor.

6. Tighten the lug bolts alternately to specification.

   Item	Measurement	Specification
   Front and Rear Lug Bolt	Torque	140 N·m 103 lb·ft