Changing Wheel Spacing and Tread Width

In special cases, front tires can be set to wide position; however, wide position cannot be used with a loader. Using wide position during loader operation reduces front axle life.

Rear tires can be mounted in one position only.

CAUTION: Avoid injury! Remove wheels safely.

  • Use a safe lifting device and support machine securely on jackstands.
  • Block front and rear of wheel not raised to prevent machine movement
  • Wheel can be heavy or difficult to handle when removing.


Mounting Guidelines

  • To keep tire rotation in right direction, move each rim to opposite side of machine, rather than turning rim around.
  • Dished wheels can be reversed.
  • Tighten all bolts to specifications.
  • Wide position—Install wheel with valve stem to the inside.
  • Narrow position—Install wheel with valve stem to the outside.

Rear Wheel Positions

For eight position wheels, the mounting flanges on the rear rims are closer to one edge of the rim than the other, allowing the inner wheels to be mounted in different positions. By changing this position of the wheel on the rim, up to eight different tread widths can be achieved on some machines.

Various positions cannot be used because the tires would strike the fenders. Certain other positions may result in equal tread widths.

Tread width is measured from centerline-to-centerline of each tire.


Rear Tire Tread Dimensions

 

Rear Tire Size

Position

22.5LL-16.1 6PR GOLF GA

44x18.00-20 4PR R3 TI

1 (Narrow)

1.5 m (59 in.)

1.4 m (55 in.)*

2

1.6 m (64 in.)

1.7 m (67 in.)

3

N/A

N/A

4

N/A

N/A

5

N/A

N/A

6

N/A

N/A

7

N/A

N/A

8 (Wide)

N/A

N/A


Rear Tire Tread Dimensions

 

Rear Tire Size

Position

16.9-24 6PR R4 TI

13.6-28 4PR R1 TI

1 (Narrow)

N/A

N/A

2

1.3 m (51 in.)

1.3 m (51 in.)*

3

1.4 m (55 in.)

1.4 m (55 in.)

4

1.5 m (59 in.)

1.5 m (59 in.)

5

1.6 m (63 in.)

1.6 m (63 in.)

6

1.7 m (67 in.)

1.7 m (67 in.)

7

1.8 m (71 in.)

1.8 m (71 in.)

8 (Wide)

1.9 m (75 in.)

1.9 m (75 in.)


Front Tire Tread Width Dimensions

 

Front Tire Size

Position

27x12LL-15 6PR GOLF GA

27x10.5-15 4PR R3

Narrow

1.4 m (53 in.)

1.4 m (53 in.)

Wide

1.5 m (58 in.)

1.4 m (53 in.)

 

Front Tire Size

Position

10.00-16.5 6PR R4 TI

8.00-16 6PR R1 TI

Narrow

1.4 m (53 in.)

1.4 m (54 in.)

Wide

1.4 m (53 in.)

1.4 m (54 in.)

* Do not install tires with chains in this position.

KN52281,100489F-19-20131024