Using Dual Selective Control Valve (SCV) Lock Lever

Tractor without Cab

LV17736-UN-09MAY13

A - Selective Control Valve Lock Lever

B - Lock Lever Label

C - Top Position

D - Middle Position

E - Bottom Position

Selective control valve (SCV) lock lever (A) allows the operator to control the type of dual SCV lever movement needed for a particular operation or situation. Operation of the lock lever is indicated on lock lever label (B).

• To allow movement of dual SCV lever in all directions, move lock lever to the top position (C). Operation of the dual SCV is totally unlocked.
• To prohibit engagement of the regen (regeneration) function of the dual SCV, move lock lever to the middle position (D). This position is recommended for all implements except for the front loader. Loader buckets will dump more rapidly when the regen function is engaged. The regen function is available only with the lock lever in top position C.
• To prohibit movement of dual SCV lever in all directions, move lock lever to the bottom position (E). Operation of the dual SCV is totally locked.

Selective Control Valve (SCV) Lever Lock—Cab

Selective control valve (SCV) lever lock (A) allows the operator to control the type of dual SCV lever movement needed for a particular operation or situation.

LV21964-UN-28MAY14

SCV Lever Shown with Optional Rear Outlet SCV control switch

A - Selective Control Valve Lock Lever

B - Lock Lever Label

C - Selective Control Valve Lever

D - Bottom Position

E - Center Position

F - Top Position

• To prohibit movement of dual SCV lever in all directions, make sure SCV lever (C) is in center position, and pull the lock lever all the way out to the bottom position (D) as shown on lock lever label (B). Operation of the dual SCV is totally locked.
• To allow movement of dual SCV lever in all directions, move the lock lever to the center position (E). Operation of the dual SCV is totally unlocked.
• To prohibit engagement of the regen (regeneration) function of the dual SCV, push the lock lever all the way in to the top position (F). This position is recommended for all implements except for the front loader. Loader buckets will dump more rapidly when the regen function is engaged.

NOTE: After extended use, the dual SCV lever may require cable adjustment to lock out.