Storing Mower

1. CAUTION: Blades are sharp. Do not store mower deck on machine or removed from machine with blades exposed. Store mower deck laying flat on ground.

   Remove mower from machine. (If machine is to be stored with mower on machine, refer to Storing Machine in your machine’s operator’s manual.)

2. Clean underside of mower with water pressure and scraper.

3. Inspect blades:

   • Have dull blades sharpened and balanced.
   • Replace damaged blades.
   
   

4. Clean top of deck and the area around all of the sheaves.

5. Check condition of belt. If necessary, get a new belt. Do not install new belt until you remove mower from storage.

6. Repair or replace any worn or damaged parts.

7. Apply touch-up paint where needed to prevent rust.

8. Lubricate grease points.

9. Release belt tension.

10. Store mower in a clean, dry place.

11. Put a waterproof cover over mower, if you store the mower outside.