Servicing Gearbox

Checking Oil Level

1. Remove plug from one side of gearbox.

2. Oil level should be even with bottom edge of plug hole.

3. If oil is low, add recommended oil.

4. Install plug.

Changing Oil

1. Remove gearbox bracket with gearbox. Refer to assembly section for additional information.

2. 
   LV24016-UN-04AUG15

   A - Plug

   Remove plug (A) on both sides of gearbox.

---




3. Lift and turn gearbox on side to drain oil from gearbox.

4. Route belt around gearbox sheave and lower gearbox onto deck. Secure gearbox bracket to deck. Refer to assembly section for additional information.

5. Add recommended oil to bottom edge of plug hole in gearbox.

6. Install plugs.