Service the Mower Deck Using the Load-N-Go Ramps

1. CAUTION: Do not walk or perform service under a raised loader, bucket or attachment unless it is securely blocked or held in position.

   Start tractor engine.

2. With the mower deck attached to the loader arms, raise the mower deck off the ground.

3. Retract the cylinders to angle the mower deck in a vertical position.

4. 
   LV30404-UN-14NOV18

   Jacking Point

   
   LV30397-UN-01NOV18

   Jacking Point

   A - Jacking Point

   Place jack stands under the deck to align with the jacking points (A) location.

---




5. Slowly lower the mower deck onto the jack stands.

6. Move the loader SCV to the float position.