|
If
|
Check
|
|
Backhoe does not run smoothly.
|
-
Tractor hydraulic oil level low.
-
Air in hydraulic oil lines. Bleed air from lines.
-
Backhoe needs lubrication.
-
Increase engine RPM.
|
|
Backhoe will not swing.
|
-
Swing lock pin is installed. Remove boom lock pin.
-
Tractor hydraulic oil level low.
-
Attempting to move too much material with swing operation.
|
|
Backhoe will not operate.
|
-
Debris inside valve cover.
-
Hydraulic lines not connected properly. Check hydraulic quick-disconnect
couplers for full engagement.
|
|
Backhoe will not hold position.
|
-
Hydraulics are leaking. Check lines and tighten any leaking
connections.
-
Tractor hydraulic oil level low.
-
Tractor hydraulic oil is dirty. Change oil if needed.
-
Lock pins are not in place during transport. Install all lock
pins when transporting.
|