Service Intervals

After Assembly	Lubricate all pivot points and grease fittings.
After Each Use	Clean backhoe of all oil and debris.
As Needed	Replace bucket teeth.
Every 10 Hours	Lubricate all cylinders.
	Lubricate swing frame.
	Lubricate boom pivot and dipperstick pivot.
	Lubricate bucket pivot and linkage.
Every 50 Hours	Lubricate stabilizer pivots.
	Check hardware torque.
Every 100 Hours	Clean inside valve covers.

NOTE: If you use backhoe for more than 10 hours daily, lubricate all points listed above twice a day.