Check Wheel Lug Bolts and Hardware

Avoid injury! Prevent possible machine roll-over by periodically checking the rim, hub, and axle hardware.

When the machine is new, check the lug bolts torque after the first 10 hours of use.

Tighten all lug bolts after 1 hour of operation and every 4 hours thereafter until proper torque values are maintained anytime the wheel hardware is loosened.

Maintained the lug bolt torque according to the service interval recommendations.

Tighten the lug bolts alternately to specifications.

Front and Rear Lug Bolt	Torque	140 N·m (103 lb·ft)