Inspect ROPS for Loose Hardware

CAUTION: Make certain all parts are reinstalled correctly if the roll-over protective structure (ROPS) is loosened or removed for any reason. Tighten mounting bolts to proper torque. The protection offered by ROPS will be impaired if ROPS is subjected to structural damage, is involved in an overturn incident, or is in any way altered by welding, bending, drilling, or cutting. A damaged ROPS should be replaced, not reused.

Tighten the ROPS attaching bolts on each side of the ROPS to specification.

Item	Measurement	Specification
Mounting Bolts	Torque	85.5—104.5 N·m 63 —77 lb·ft