Remove Broom

LV27569-UN-02FEB17

LV27777-UN-23FEB17

LV27571-UN-02FEB17

A - Back Collar

B - PTO Output Shaft

C - PTO Support Shaft

D - L-Pins

E - Pins

F - Notches

1. Park machine safely with broom raised

2. Avoid damage! Lower the park stands before lowering broom to ground or bristles can be damaged.

   Install parking stands in the lowered position.

3. Lower broom onto gauge wheels and parking stands.

4. Pull back collar (A) on PTO shaft coupler. Pull driveshaft straight back until it disconnects from PTO output shaft (B).

5. Put PTO shaft support (C) in support position as shown. Put PTO shaft on support.

6. Pull both L-pins (D) outward and turn to unlocked position with roll pins in grooves.

7. Push the lower hydraulic control lever on the tractor forward to lower the front quick hitch.

8. Drive tractor back slowly until pins (E) in broom frame disengage from notches (F) in hitch.

9. Avoid injury! When the attachment is removed, also remove any ballast that was added to the machine.

   Use only attachments and accessories recommended by the manufacturer.

   Remove any ballast.