Operating Safely

• Read, understand and follow all instructions in the manual and on the vehicle and attachment before operating.
• Only allow responsible adults who are familiar with the instructions to operate the machine.
• Never direct the discharge at bystanders or allow anyone to stand in front of the unit.
• Never operate the broom near glass enclosures, automobiles, window wells, or drop-offs without first adjusting the angle and direction of the discharge.
• Inspect machine and attachment before you operate. Be sure hardware is tight. Repair or replace damaged, badly worn or missing parts. Be sure guards and shields are in good condition and fastened in place. Make any necessary adjustments before you operate.
• Clear work area of objects that might be thrown. Keep people and pets out of the work area. Stop machine if anyone enters the area.
• If you hit an object, stop and inspect the machine. Make repairs before you operate. Keep machine and attachments properly maintained and in good working order.
• Use recommended ballast.
• Do not leave machine unattended when it is running.
• Do not operate machine when you are tired or ill or under the influence of drugs or alcohol.
• Only operate during daylight or with good artificial light.
• Look behind machine before you back up. Back up carefully.
• Do not let anyone, especially children, ride on machine or attachment. Riders are subject to injury such as being struck by foreign objects and being thrown off. Riders may also obstruct the operator’s view, resulting in the machine being operated in an unsafe manner.
• Use extreme caution when operating on or near gravel drives, walks, or roads. Stay alert for hidden hazards or traffic.
• Do not wear radio or music headphones while operating the machine. Safe operation requires your full attention.
• Slow down before turning. Avoid sudden turns.
• Don’t operate near drop-offs, ditches or embankments.
• Avoid the edges of ditches and banks to reduce the possibility of loss of control.
• Lower attachment completely before leaving operator’s seat.
• Lower any attachment completely to the ground or to an existing attachment mechanical stop before servicing the attachment. Disengage all power and stop the engine. Lock park brake and remove the key.
• Keep all parts in good condition and properly installed. Fix damage immediately. Replace worn or broken parts. Replace all worn or damaged safety and instruction decals.
• Turn on flashing warning lights whenever traveling on highway except where such use is prohibited by law.