Install PTO Shaft

Avoid damage. Broom uses two different shear bolt lengths and diameters. Use of wrong shear bolt can damage the gearbox.

LV27555
LV27555-UN-02FEB17

LV27556
LV27556-UN-02FEB17

A - Shear Bolt and Locknut

B - PTO Shaft Support

C - Shear Bolt and Locknut

  1. Remove one 5.7 cm (2.25 in) shear bolt (A) and locknut stored at back side of broom.

  2. Position PTO shaft support (B) as shown.

  3. Slide PTO shaft onto broom stubshaft.

  4. Align hole in PTO shaft with hole in stubshaft.

  5. Install shear bolt (C) and locknut.

UP00731,00001E6-19-20170223