Tow Loads

Avoid injury! Stopping distance increases with speed and weight of towed load, and on slopes. Towed loads with or without brakes that are too heavy for the machine or are towed too fast can cause loss of control. Consider the weight of the equipment and its load.

Observe these recommended maximum road speeds, or local speed limits if they are lower:

• If towed equipment does not have brakes:
  • Do not travel more than 32 km/h (20 mph).
  • Do not tow loads more than 1.5 times the tractor weight.
• If towed equipment has brakes, do not travel more than 40 km/h (25 mph) and do not tow loads more than 4.5 times the machine weight.

  Ensure that the load does not exceed the recommended weight ratio. Add ballast to recommended maximum for machine, lighten the load, or get a heavier towing unit. The tractor must be heavy and powerful enough with adequate braking power for the towed load. Use additional caution when towing loads under adverse surface conditions, when turning, and on inclines.

1. Hitch the towed load only to the rear hitch plate.

2. Connect safety chains to the lower draft arm crossbar and to the towed load. Provide only enough slack to permit turning.

3. Before descending a hill, shift to a gear low enough to control the machine travel speed without having to use the brake pedal to brake the machine and installed implements.