Check and Drain Water Separator

Avoid injury! Fuel vapors are explosive and flammable:

• Do not smoke while handling fuel.
• Keep fuel away from flames or sparks.
• Shut off engine before servicing.
• Cool engine before servicing.
• Work in a well-ventilated area.
• Clean up spilled fuel immediately.

Change filter when fuel level is low.

Check Sediment Bowl

1. Park machine safely. Allow engine to cool.

2. Check fuel sediment bowl. If water and deposits are detected, remove bowl and replace fuel filter.

Clean Sediment Bowl and Replace Filter

LV27654-UN-17FEB17

A - Fuel shutoff Valve

B - “C” (Closed) Position

C - Sediment Bowl

D - Locking Collar

1. Move the fuel shutoff valve (A) to the “C” (closed) position (B).

2. Position drain pan under the sediment bowl (C).

3. Turn locking collar (D) counterclockwise to remove the bowl.

4. Remove and discard the fuel filter.

5. Clean bowl.

6. Install new filter to the filter head.

7. Install sediment bowl and locking collar.

8. Open fuel shutoff valve.

9. Fuel system is self-bleeding.

   Turn key to the ON position for 10-15 seconds before attempting to start. The electric pump purges air from the sediment bowl.