Lift Points for Jacking up the Tractor

The illustrations show the recommended lifting points for jacking up the tractor. Use a stable lifting jack with sufficient lifting force.

LV28102-UN-12APR17

A - To remove left front wheel, raise left end of axle at this point.

B - To remove right front wheel, raise right end of axle at this point.

C - To remove left rear wheel, raise left rear of tractor at this point.

D - To remove right rear wheel, raise right rear of tractor at this point.

LVAL38572-UN-20SEP12

Jack Stands JT02043 and JT02044

JT02043 - Jackstand, 482 mm to 736 mm (19 in to 29 in)

JT02044 - Jackstand, 863 mm to 1117 mm (34 in to 44 in)

LVAL38573-UN-20SEP12

Jackstand Position Example

Jack up the tractor on firm, level ground only.

Before doing any further work on the tractor, first secure it using suitable jack stands. The special John Deere tools shown can be used for this purpose. These jack stands are available from your John Deere dealer.