Service Air Filter Elements (1023E—S.N. J117914—), (1025R—S.N. J153037—)

Avoid injury! Touching hot surfaces can burn skin. The engine, components, and fluids are hot if the engine has been running. Allow the engine to cool before servicing or working near the engine and components.

Avoid damage! Dirt and debris can enter the engine through a damaged filter element.


Service Primary Air Filter Element:

  1. LV30020
    LV30020-UN-13APR18

    LV30018
    LV30018-UN-06APR18

    A - Latch

    B - Canister Cover

    C - Primary Element

    Park machine safely.


  2. Allow the engine to cool.

  3. Raise the hood.

  4. Remove the side panel.

  5. Pull out latch (A) from canister cover.

  6. Twist the canister cover (B) to the unlock position and remove.

  7. Remove and discard the primary element (C). Clean out any dirt in canister, taking care not to damage the secondary filter element. Replace with a new primary filter element.

  8. Install canister cover with rubber dust unloading valve pointing downward.

  9. Twist the canister cover to the lock position.

  10. Push in the latch to secure the canister cover.

  11. Install the side panel.

  12. Lower the hood.


Service Secondary Air Filter Element:

Avoid damage! Secondary element does not need routine replacement. Visually inspect it without removing from canister. Do not attempt to clean secondary element. If secondary element is replaced, install new primary and secondary element immediately to prevent dust from entering the air intake system.

  1. Remove the canister cover.

  2. Remove and discard primary air filter element.

  3. LV30019
    LV30019-UN-06APR18

    A - Secondary Element

    Remove and discard secondary air filter element (A). Replace with a new secondary air filter element.


  4. Install new primary air filter element.

  5. Install canister cover.

  6. Install canister cover with rubber dust unloading valve pointing downward.

  7. Twist the canister cover to the lock position.

  8. Push in the latch to secure the canister cover.

  9. Install the side panel.

  10. Lower the hood.

UP00731,000056B-19-20180409