Replace Relays and Fuses

Avoid damage! If incorrect replacement fuses are used, the electrical system can be damaged. Replace the bad fuse with a fuse of the same amperage rating.

Locate Fuses and Relays

All the electrical circuits are protected by the fuses. ampere rating is marked on each fuse, plus fuses are color coded to ensure proper replacement.

Fuses
Fuse Rating	Color
10 A	Red
15 A	Blue
20 A	Yellow
30 A	Green

Fuse Location

1. Park the machine safely.

2. Raise the hood and remove the right side panel.

3. 
   LV27342-UN-25JAN17

   
   LV30327-UN-24SEP18

   Load Center-3rd Function (If equipped)

   
   LV30309-UN-21SEP18

   Relay Load Center-3rd Function (If equipped)

   A - Load Center

   Locate the load center (A).

---




4. Identify the fuse or relay in the fuse block.

5. If third function kit is installed, there are two fuse taps that contain two fuses in each.

   Pull out the defective relay or fuse.

6. Replace with the new relay or fuse.

7. For third function kit only:

   1. Fuse tap labeled with “SW 12 V” must be installed back into location (K).

   2. Fuse tap labeled with “BATT-PWR” must be installed back into location (H).

8. Install the side panel.

Fuse and Relay Size and Function

LV23806-UN-05MAY15

A - Relay—Glow Plug

B - Relay—Started

C - Relay—Fuel Slenoid

D - Fuse—Taillights (10 A)

E - Fuse—Headlights (10 A)

F - Fuse—Fender Lights (1025R only) and Worklights (Option) (20 A)

G - Fuse—Brake Lights (10 A)

H - Fuse—Ignition Run Power (10 A)

I - Fuse—Ignition Switch (20 A)

J - Fuse—Light Switch (30 A)

K - Fuse—Power Outlet (1025R only)

L - Relay—Brake Lights

LV30326-UN-24SEP18

With Third Function (If Equipped)

H - Fuse—Ignition Run Power (10 A)

K - Fuse—Power Outlet (1025R only)

O - Fuse—Battery Power (10 A)

P - Fuse—12 V Switched Power (10 A)

Q - Label—SW 12 V

R - Label—BATT-PWR

LV30325-UN-24SEP18

Relay Load Center-3rd Function (If Equipped)

M - Relay—Third Function Retract

N - Relay—Third Function Extend