Clean Radiator Cooling Fins

Avoid injury! Compressed air can cause debris to fly a long distance.

  • Clear work area of bystanders.
  • Wear eye protection when using compressed air for cleaning purposes.
  • Reduce compressed air pressure to 210 kPa (2.1 bar) (30 psi).

Avoid damage! Reduced air intake can cause overheating. Keep radiator cooling fins clean.

Do not use pressure washers to clean radiator cooling fins. The force produced by pressure washers can damage the radiator and cooling fins.

Reduce compressed air pressure to 210 kPa (2.1 bar) (30 psi) when cleaning radiator and cooling fins. Spray compressed air straight into radiator. Do not spray radiator on an angle or cooling fins can be bent.

  1. Park machine safely. (See Parking Safely in Safety section.) Allow engine to cool.

  2. Raise hood.

  3. LV17622
    LV17622-UN-01MAY13

    A - Radiator

    B - Air Conditioner Condenser

    C - Intercooler

    Using compressed air or water, remove all dirt and debris from fins at front and rear of the following:

    • Radiator (A), including fan shroud.
    • Air Conditioner Condenser (B).
    • Intercooler (C).


  4. Lower hood.

KN52281,10047FD-19-20130903