Replace Tail Light, Turn Signal Light, and Warning Light Bulbs

Tail light and warning lights can be serviced by removing the rear assembly lens only.

1. Park machine safely. (See Parking Safely in Safety section.)

2. 
   LV17631-UN-31JUL13

   
   LV17632-UN-31JUL13

   A - Screws

   B - Red Lens

   C - Amber Lens

   D - Tail light and Turn Signal Bulb

   E - Warning Light Bulb

   Remove four screws (A), red lens (B), and amber lens (C).

---




3. Push down and rotate tail light and turn signal bulb (D) to remove. Push down and rotate warning light bulb (E) to remove. Do not twist bulb.

4. Push down and rotate new bulb into socket.

5. Check operation of tail lights, turn signals and warning lights.

6. Install lens and screws.