Clean Cab Air Filter

Avoid damage! Remove any rear implement before servicing cab air filter. Do not stand on 3-point hitch or PTO shield.

LV17750
LV17750-UN-14MAY13

LV17751
LV17751-UN-14MAY13

LV17752
LV17752-UN-14MAY13

A - Wing Bolts

B - Filter Base

C - Filter

D - Tabs

E - Slots

  1. Remove two wing bolts (A), washers, and filter base (B).

  2. Remove filter (C) from filter base, and clean with compressed air. Inspect filter for damage. Replace if necessary.

  3. Install filter into base.

  4. Install filter base, making sure six tabs (D) on roof panel are installed into slots (E) in filter base. Secure base assembly into roof panel with two washers and wing nuts.

KN52281,1004833-19-20130521