Replace Light Bulbs (Tractor with Cab)
Dome Light Bulb
LV17766-UN-14MAY13
LV17767-UN-14MAY13
A - Cover
B - Bulb Housing
C - Bulb
-
Remove cover (A) from housing (B) using a screwdriver.
-
Pull bulb (C) from socket
-
Install new bulb and cover.
Tail light Bulb
LV17768-UN-14MAY13
Left Rear Shown
LV17769-UN-14MAY13
A - Cover
B - Socket
-
Remove four screws and cover (A) under fender.
-
Rotate socket (B) and remove from housing.
-
Install new bulb and socket in housing.
-
Install cover and screws to fender.
Warning Light Bulb
LV17774-UN-14MAY13
LV17775-UN-14MAY13
A - Screws
B - Lens Assembly
C - Tab
D - Socket
Bulb replacement procedures for front and rear warning
lights are similar. On rear warning light, bracket for the work light
is also removed when removing two screws. Front right side shown.
-
Remove two hex socket head screws (A) and lens assembly (B)
from cab roof panel.
-
Push in tab (C) and rotate socket (D) counterclockwise to remove
from housing. Install new bulb into socket.
-
Install socket, and rotate clockwise to lock tab into position.
-
Install housing with two hex socket head screws.
Work Light Bulb
LV17776-UN-14MAY13
A - Harness Connector
B - Bulb Base
Bulb replacement procedures for front and rear work lights
and optional auxiliary work lights are the same. Rear left side shown.
-
Disconnect wiring harness connector (A).
-
Rotate bulb base (B) counterclockwise and remove from housing.
-
Install new bulb into housing and rotate bulb base clockwise
to install.
-
Connect wiring harness connector.
|
KN52281,1004837-19-20130603
|
|