Maintenance Interval Chart—Daily to Every 400 Hours

Maintenance Interval Chart — Daily to Every 400 Hours

Item

After first 10 hours

Every 10 Hours or Daily

Every 50 Hours

Every 100 Hours

Every 200 Hours

Every 400 Hours

Check wheel bolt torque.

         

Check cab rollover protection system mounting hardware torque.

         

Check windshield wiper arm mounting hardware torque.

         

Check safety interlock system.

 

       

Check engine oil level.

 

       

Check transmission oil level.

 

       

Check air filter rubber dust valve.

 

       

Check radiator coolant level.

 

       

Grease trunnions when used in wet land applications.

 

       

Check front axle oil level.

   

     

Lubricate machine.

   

     

Check cab rollover protection system mounting hardware torque.

   

     

Check or replace cab air filters.

   

     

Check hardware torque on front hitch (if equipped).

   

     

Check front hitch hydraulic connections for leaks.

     

   

Change engine oil and filters.

       

 

Check and adjust alternator belt.

       

 

Check wheel bolt torque.

       

 

Ceck and adjust air conditioner compressor belt (if equipped).

       

 

Check air restriction indicator light.

       

 

Change transmission oil and filters.1

         

Replace front PTO gearbox oil (JD20D) and filter, if equipped.

         

Replace primary fuel filter/water separator.

         

Replace final fuel filter.

         

1 Transmission oil can be changed every 1200 hours or 3 years if the specific requirements are met, see Transmission Maintenance for additional information.

UP00731,0000360-19-20170627