Remove and Install Wheels

Avoid injury! Remove wheels safely.

• Use a safe lifting device and support machine securely on jack stands.
• Block front and rear of wheel not raised to prevent machine movement.
• Wheel can be heavy or difficult to handle when removing.

1. Loosen lug bolts slightly before raising machine.

2. Raise machine and lower onto jackstand.

3. Remove lug bolts and wheel.

4. Install wheels onto axle, insert lug bolts, and lightly tighten bolts.

5. Raise machine, remove jackstand and lower machine to floor.

6. Tighten wheel bolts alternately to specification.

   Wheel Bolt	Torque	140 N·m (103 lb·ft)