Required Equipment

CAUTION: Avoid injury! Always have the front loader installed on tractor before operating the backhoe. The loader provides front ballast to make machine more stable during backhoe operation and provides better steering control during tractor operation.

To provide maximum machine stability, mount rear wheels in the widest position.

Adequate headroom is required for the operator when sitting in backhoe seat. Do not operate the backhoe if the roll-over protection system (ROPS) does not provide adequate headroom

Before operating the backhoe, tractor rear wheels must be mounted in widest position, and the following equipment must be installed on the tractor. See your John Deere dealer.

• Front Loader - Follow ballast requirements in the loader operator’s manual, except the backhoe replaces 3-point hitch ballast.
• Roll Over Protection System (ROPS)
• Power Beyond hydraulic kit

IMPORTANT: To avoid damage to tires and drivetrain, do not add rear ballast or tire weights to the tractor with the backhoe installed.

To extend drivetrain life and avoid excessive soil compaction and rolling resistance, remove the rear ballast and tire weights from tractor when installing backhoe.

Do not add rear ballast or tire weights to the tractor with the backhoe installed.