Using Travel Controls

CAUTION: Reduce speed before braking or turning, when hauling loads, and while operating around obstacles or on hazardous off-road conditions.

IMPORTANT: Do not shift gears when vehicle is moving or with engine running above low idle speed. Push down brake to stop vehicle motion and engage shift lever with a firm positive action.

Gears may grind when shifting if engine idle speed is set higher than factory specification.

Traveling Forward

1. Push shift lever forward to position.

2. Look in the direction the machine will travel.

3. Push down accelerator pedal slowly and smoothly to begin machine travel.

Traveling in Reverse

1. Stop machine.

2. Push shift lever to right, then pull rearward to reverse position.

3. Look behind the machine to be sure there are no bystanders nearby.

4. Push down accelerator pedal slowly and smoothly to begin machine travel.

Stopping

1. Release accelerator and push down brake pedal.