Prepare Brakes

NOTE: This procedure shall be completed only once, prior to first use of vehicle.

Seat Brakes

1. Push brake pedal fully to the floor panel and release.

2. Repeat this procedure 10 - 15 times.

3. Lock park brake.

Burnish Brakes

1. Start the engine.

2. Hold throttle pedal at half speed position. Allow engine to warm 30-60 seconds.

3. Unlock the park brake.

4. Shift transaxle to forward position and drive 6 - 9 m (20 - 30 ft) forward while applying medium pressure to the brake pedal.

5. Shift transaxle to reverse position and drive 6 - 9 m (20 - 30 ft) rearward while applying medium pressure to the brake pedal.

Check Fluid Levels

• Check all fluid levels.

Test Safety Start System

Test the safety start system. (See Testing Safety Systems in the Operating section.)