Using Traction Assist

CAUTION: Driving at high speeds with the traction assist engaged may result in loss of steering control. Do not engage traction assist or turn with the traction assist engaged while operating machine at high speeds or on slopes.

Traction assist is used to provide better traction when rear wheels start to slip. Do not use traction assist unless you are experiencing rear wheel slippage. Engaging traction assist will cause both rear wheels to drive equally to improve traction.

Engaging Traction Assist

1. IMPORTANT: Using the traction assist function improperly can damage the transaxle:

   • Reduce speed and allow drive wheels to rotate at same speed before engaging or disengaging traction assist.
   • Disengage traction assist when driving on dry asphalt or concrete.
   • Use traction assist only when necessary for improved ground engagement.
   
   

   Stop or slow machine down.

2. Push down on traction assist pedal. Traction assist will remain engaged as long as pedal is depressed.

NOTE: Turning radius is increased when traction assist is engaged.

When brake pedal is depressed, traction assist will automatically engage.

Disengaging Traction Assist

1. Release traction assist pedal.

2. Once the load on the transmission is equalized and reduced, traction assist will disengage automatically.