Ballasting Machine

Using Front Weights

IMPORTANT: Do not exceed maximum front ballast of nine Quick-Tatch weights and two wheel weights.

Two types of front weights are available for your machine, Quick-Tatch weights and wheel weights. Quick-Tatch weights can be mounted on the front bumper, and wheel weights are mounted on the front wheels.

Up to four Quick-Tatch weights can be mounted on the front bumper. Another five weights can be added if you install the optional front weight bracket. Each Quick-Tatch weight is 19 kg (42 lb).

One wheel weight can be installed on each front wheel. Each front wheel weight is 14 kg (30 lb).

See your John Deere dealer for front weights and kits to best fit your needs.

Using Rear Weights

IMPORTANT: Do not exceed maximum rear ballast of 385kg (850 lb). Rear ballast includes Quick-Tatch weights, rear wheel weights, weight box, and adding liquid weight to tires.

Two types of rear weights are available for your machine, Quick-Tatch weights and wheel weights. The Quick-Tatch weights can be mounted on an optional rear weight bracket, and wheel weights are mounted on the rear wheels.

Up to six Quick-Tatch weights can be mounted on the rear weight bracket. Each Quick-Tatch weight is 19 kg (42 lb). Use of these weights is required when an attachment, such as a snowthrower or snowblower is used.

Up to three wheel weights can be installed on each rear wheel. Rear wheel weights are available in 23 kg (50 lb) and 33 kg (72 lb).

See your John Deere dealer for rear weights and kits to best fit your needs.

Follow instructions in this manual for installing rear wheel weights.

Adding Liquid Weight in Tires

CAUTION: Installing liquid ballast requires special equipment and training. Injury may occur from exploding tire. Have the job done by your John Deere dealer or a tire service store.