Testing the Safety Start System

  1. Sit on the operator’s seat.

  2. Turn ignition key switch to STOP position.

  3. Lock park brake.

  4. Move transaxle shift lever forward to the Low or High range position.

  5. Turn ignition key switch to START position. Engine should not crank. Turn ignition key switch to STOP position.

  6. Move transaxle shift lever to Reverse position.

  7. Turn ignition key switch to START position. Engine should not crank. Turn ignition key switch to STOP position.

  8. Move transaxle shift lever to N (Neutral) position.

  9. Turn ignition key switch to START position. Engine should not crank. Turn ignition key switch to STOP position.

  10. Move transaxle shift lever to N (Neutral) position.

  11. Start engine, allow to run a few seconds, and stop engine.

BB87125,0000D5B-19-20130419