Burnish Brakes

CAUTION: Avoid injury! Test a machine under safe conditions. Perform this procedure in a clear open area. Keep bystanders away. Do not attempt any maneuvers that could jeopardize vehicle control. Failure to adhere to these precautions could lead to machine damage, serious personal injury, or death.

1. Park the vehicle safely.

2. Check tire pressure.

3. Check brake fluid level; add if necessary.

4. Start machine, and shift transmission into low range.

5. Disengage traction assist.

6. Disengage all-wheel drive.

7. On a straight, hard surface, hard surface, accelerate up to full throttle in low range, not to exceed 32 kph (20 mph).

8. IMPORTANT: Avoid damage! Use care to avoid overheating brakes while performing the next step. Do not allow brakes to lock.

   Using moderate pressure, apply brakes to bring the machine to a complete stop.

9. Repeat steps seven and eight 20 more times.