Prepare Machine

1. Check tire pressure of machine before operating machine.

   Tire	Pressure
   Front	150 kPa (22 psi)
   Rear	41—70 kPa (6—10 psi)

2. Install appropriate tire chains to improve traction.

3. Avoid injury! Machine can become unstable when operating with attachment. Ballast is required when the attachment is installed. When the attachment is removed, also remove any ballast that was added to the machine. Use only attachments and accessories recommended by the manufacturer.

   Required Ballast:

   • Two wheel weights.
   
   

   Recommended ballast:

   • X700 series: Rear weight box with 9 suit case weights (with this option wheel weights not needed).
   • X950R: Rear weight bracket with 6 suit case weights (with this option wheel weights not needed).
   
   

   To improve traction:

   Certain working conditions may be improved by using tire chains or rear ballast.

   • Install chains on rear drive tires.
   • Install wheel weights on rear drive wheels.
   • Install rear weight bracket or rear weight box with suitcase weights.