Adjusting Cutting Height

Cutting height can be adjusted from approximately 25-100 mm (1-4 in.). When mower deck is in transport position cutting height is approximately 100 mm (4 in.).

Mower cutting height increments are identified on decal around the cutting height knob. To change or attain cutting height desired:

1. Check tire pressure and adjust as needed.

2. 
   MXT005369-UN-21JUL13

   Mechanical lift model shown.

   Raise mower deck:
   • For models with mechanical lift: Push pedal (A) to raise mower deck to highest (transport) position. Pull up on mower lift lock lever (B) to lock in raised position.
   • For models with hydraulic lift: Pull up on hydraulic mower lift lever (B) to raise mower deck.
   
   

---




3. Turn mower cutting height knob (C) to desired cutting height position. Mower will be at this cutting height each time it is lowered.

4. Lower mower deck.

5. Adjust mower deck wheels.