Service Intervals

Break-In after 8 Hours

• Change engine oil and filter.

Break-In after 50 Hours

• Change transaxle oil and filter - X310 and X360.
• Checck rear wheel bolt torque, 65 ft-lbs.

Every 50 Hours or Annually

• Lubricate front axle pivot and axle spindles.
• Lubricate mower spindles, pivot points, and lift pedal.
• Lubricate rear U-Joints - 4-Wheel Steer Models.
• Lubricate power steering cylinder ends - X310 and X360.

Every 100 Hours or Annually

• Change engine oil and filter.
• Replace spark plugs.
• Replace air filter elements, both foam and paper.
• Replace fuel filter.
• Clean engine cooling fins.
• Check mower belt.
• Sharpen / replace blades.
• Clean bottom side of deck.
• Check tire pressure.

Every 200 Hours

• Change transaxle oil and filter - X310 and X360.
• Check / adjust valve clearance. See your John Deere dealer for this service.