Install Mower Anti-Scalp Wheels

1. Install anti-scalp wheels:

   38 in. and 42 in. Mowers:

   NOTE: Anti-scalp wheels on 38 in. and 42 in. mowers are not installed in correct hole position for operation.

   
   MXAL46076-UN-09APR13

   38 in. mower shown.

   • Remove shoulder bolt (A) and nut (B). Move wheel (C) to proper hole position. Secure with shoulder bolt and nut. Tighten nut to 34 N·m (25 lb-ft).
   
   

   48 in. Single Belt Drive Mower:

   
   MXAL46077-UN-09APR13

   • Remove shoulder bolt (A) and nut (B). Move wheel (C) to proper hole position. Secure with shoulder bolt and nut. Tighten nut to 34 N·m (25 lb-ft).
   
   

   48 in. and 54 in. Two Belt Drive Mowers:

   NOTE: Anti-scalp wheels on 48 in. and 54 in. two belt drive mowers are located upside down on mower deck for shipping.

   • 
     MXAL46078-UN-09APR13

     Remove locking clip (D), pull pin (E) outward and remove wheel and shaft (F) installed upside down on mower deck. Install from the bottom of deck to proper hole position, as shown. Install pin and locking clip to lock wheel in position.

   ---

   
   

---




2. Adjust mower level before operation.