Service Intervals

Break-In after 8 Hours

Change engine oil and filter.

Break-In after 50 Hours

Change transaxle oil and filter - X310.

Every 50 Hours or Annually

Lubricate front axle pivot and axle spindles.

Lubricate mower spindles, pivot points, and lift pedal.

Lubricate rear U-Joints - 4-Wheel Steer Models.

Check rear wheel bolt torque (65 lb.-ft.)- 4-Wheel Steer Models.

Lubricate power steering cylinder ends - X310.

Every 100 Hours or Annually

Change engine oil and filter.

Replace spark plugs.

Replace air filter elements, both foam and paper.

Replace fuel filter.

Clean engine cooling fins.

Check mower belt.

Sharpen / replace blades.

Clean bottom side of deck.

Check tire pressure.

Every 200 Hours

Change transaxle oil and filter - X310.

Check / adjust valve clearance. See your John Deere dealer for this service.